The-Artistic-Garden's Blog

Ideas For Using A Garden Mirror
And Outdoor Safety Tips

Wanda emailed and asked:

I want a mirror for my garden. I have heard there are plastic mirrors or that stainless steel would be good for a mirror. Can you tell me if you have made one and how you did it. I want it to be fairly large.

Oh, and thanks for the info on your garden mirror page on your website. Thanks for your help.

My reply:
Hello Wanda:
I did have a mirror in my garden area a few years ago, however used an old (real) glass mirror that had a neat looking distressed frame around it, so I wasn’t too worried about the silver backing wearing off in spots due to exposure to the elements. I hung it on a wall in my garden area. I have since taken it down for various reasons.

But to further answer your question, if I were to do it again, especially a large one as you are mentioning you want to do … I would buy a plastic mirror because it will be lighter in weight, safer for outdoor use, and last much longer if left outside than a glass mirror. Also, I think that a large piece of glass is really not a wise choice to be placed out in one’s garden, mine included.

I would also wager that from a cost standpoint, you will find a plastic mirror much more affordable than a piece of highly polished stainless steel. It might be a bit hard to find a plastic, or sometimes also referred to as ACRYLIC, mirror supplier but I just did an online search via Google and do see suppliers. Type these words into the search box: plastic acrylic mirrors. You can check out the various websites.

Other than that, as far as making a mirror that is attractive for outdoor use, my suggestion is to provide an interesting frame of some sort (distressed looking; or painted in lively colors; etc.) that suits your outdoor décor and garden “theme” and basically mount the piece of mirror onto the frame as you would mount a picture into a frame.

Another idea would be to find an interesting looking, old wooden door; cut out an area in the middle, and mount the mirror onto the door from the backside, thusly the door is serving as a “frame” … and then prop the door in a corner of your garden, as example, to serve as an interesting and unique focal point.

You want it to be large … just remember birds are known to fly right into garden mirrors (they could break their necks from this – poor things!), and if the sun reflects just “right” off the mirror onto another surface that is combustible … you could have a fire start (just like the way children can start a fire by using a magnifying glass to project an intense beam of sunlight). So PLEASE be careful of the ultimate placement of your garden mirror.

And, of course I am sure your imagination will give you lots of other good ideas to make one, too! Put on your creative thinkin’ cap!

Good luck!

What Is The Best Method To Seal Off The Interior
Of A Terra Cotta Pot?

I received an email from Leslie asking:

This is a fantastic website, extremely helpful. I have found the articles in the Decorative Paint Techniques category very informative. THANKS!

My question: I am using gauze fabric and modpodge and then painting over it with airbrush metallic paint on the outside of the terra cotta clay pot. Any ideas what to use to seal the inside of my pot, so that when dirt goes in and the pot is watered, it won’t effect the outside of the pot?

Thanks so much. Leslie

My reply:
Hi Leslie:
Thanks for the compliments, I really appreciate you taking the time to tell me.

About sealing the inside of a terra cotta pot, there are two ways you can approach this:

#1) Apply a number of coats of an acrylic or latex paint to seal off the inside. (Easier for brush clean-up than oil-base paint.) You can also use a clear spray, like Krylon acrylic. Or, try a polyurethane. Anything, basically, will “seal off” the interior.

#2) The “safest” route to really make double-sure that whatever you’ve applied and/or painted on the exterior of the pot won’t be affected is to use a plastic inner pot to plant in.

I’ve never had a problem with the exterior paint bubbling or flaking off of terra cotta pots, as I do always liberally spray about 3-coats of Krylon onto the interiors … but then again, I haven’t ever used fabric and modpodge on the outsides.

If I were you, I’d make sure to apply a generous base coat of paint on the outside of the pot, too. Unless that would keep your fabric and glue from sticking properly?? That base coat on the outside will also act as a moisture barrier.

If you do use a brush-on paint or spray paint for the interior of the terra cotta pot, I’d make sure to cover all the surfaces extremely well.

Does this help??

Sounds like a fun project. Good luck!

Leslie wrote back:

Dear Claudia: Thanks so much for getting back to me. Your information was wonderful and very helpful!!! I’ll definitely try that technique on the pots. I’m going to do some experiments first to see just how they do outside. I’ll do this before I decide to sell them, so my clients won’t have any problems. All the best, Leslie

My reply:
You’re welcome. Like I said, an inner plastic pot that actually holds the dirt and plant would be the very best bet to increase the longevity of your artistic applications!

And providing a plastic inner pot would let you off the hook “legally” if you are selling your pots … meaning you clearly state on a little label that your embellished terra cotta pots are NOT guaranteed to last forever if someone places dirt and a plant directly into them.

If it were me … I would cover myself in that way if selling them retail. You’ve warned them up front and provided the plastic inner pot … no unhappy customers on up the road!

Just my 2-cents. Claudia